What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
| DVD Player | Hacks | Updated | Add |
| Toshiba SDV392 | 8 user region code comments |
April 22, 2009 | Post region code/hack comment |
 Region code hack posted by dvduserim, September 02 2005: | |||
you Need: download 2 files from http://savefile.com/files/3643374 http://savefile.com/files/2269221 burn them in a cd. 1.- Turn ON the SD-V392 2.- Remove both the VCR cassette and any dvd inside. 3.- Open the DVD tray. Left it open. 4.- Press "6" on the remote control. Hold it pressed. 5.- Press the "REC" button on the SD-V392. Hold it for at least 3 seconds. Release it. 6.- Release the "6" button on the remote. 7.- Assert that the DVD tray won't close with the "open/close" button on the SD-V392. 8.- If the dvd tray closes with the button go back to step 3. 9.- If the tray doesn't close then put the recorded cd you created on the tray and close it by pushing manually. 10.- A message "Update disc" will appear on the screen. Then you will see "Firmware upgrade: Please Wait...". When the update is completed the tray will automatically open. Remove the dic from the unit. 11.- WAIT UNTIL THE TRAY CLOSES. DON'T CLOSE ON TURN IT OFF.The tray will close in about a minute. UNPLUG THE UNIT. 12.- Your SD-V392 is zone free. | |||
| Region code hack posted by dlm, September 29 2005: | |||
This an update from my previous comment , the hack is a winner i did it succesfully. You have to erase the words and numbers that save file ads to the file leaves only build.img on the first file and vr_dm3p.nxx on the second then burn the cd and follow the steps above. Result :zone free player | |||
| Other hack posted by dave, October 04 2005: | |||
this hack worked until a region 2 disk was inserted. it still reads "incorrect disk." it does seem that there is an icon that looks like a mountain beside the open icon now that the firmware has been upgraded. still trying...any help would be great. | |||
| Other hack posted by Beel, October 06 2005: | |||
(The hack works until step 9. I have not yet rename the files as suggested by dlm) Here the message I get on screen when inserting a disc in a non modified R1 dvd player: R2 PAL : Region Code Error R0 PAL : Incorrect Disk In his message posted October 04 2005, Dave read "Incorrect Disk" after a region 2 disk was inserted. Could we conclude that the hack makes the Dvd player region free but does not do PAL/NTSC conversion? | |||
| Region code hack posted by Junay, November 21 2005: | |||
After the step 9 the DVD player started the read of the CD that was burn. About two minutes later I got the message "Incorrect Disk". I waited some minutes (ten minutes) and the message still was in the screen. Did someone have the same situation ? Is it possible that the files downloaded were burned in wrong way ? | |||
| Other hack posted by palerror, December 03 2005: | |||
I think what the other poster stated is correct about PAL playback. I inserted a region free PAL DVD I made and get incorrect disc error. As for burning the cd, I used "disc at once" instead of "track at once" and make sure you finalize the disc. Also make sure you have the files named correctly from the second post. If that still does not work, you can add a 500MB dummy file to the cd first before you add the two files. | |||
| Region code hack posted by Mairel, November 02 2006: | |||
Tengo un modelo toshiba sd-v392su, rerán los mismos procedimientos para hacerlo multizona que el que aqui postean.. | |||
| Region code hack posted by armenzadoorian, April 22 2009: | |||
where can i get this files? please upload it again! | |||
| 1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!