What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
DVD Player | Hacks | Updated | Add |
Sony RDR-HXD910 | 3 user region code comments |
November 10, 2008 | Post region code/hack comment |
![]() | |||
All - I have just hacked my RDR-HXD910, using the pretty simple and straight-forward method mentioned (by bugghult and wildwilly) under the RDR-HX710 hacks: however, I did this using a Palm T3, with a trial-version (available from the PalmOne.com software website) of NoviiRemote using the "Sony1" coding loaded on to it. Simply following the instructions provided on the HX710 hacks, I turned my DVD Recorder to standby, hit "1122334455" TWICE on my Palm's NoviiRemote interface, GOT NO REACTION from the recorder, turned on the recorder and loaded a Region 1 disk (I'm Region 2) - and all DVDs now appear to play on it! Good luck! | |||
![]() | |||
I used the Kameleon 3 all-in-one and the below mentioned procedure worked perfect for my RDR-HX910. Attention : I first did put a region 1 DVD and waiting until I got the code that it was blocked for region reasons. Then I did put my recorder in the HD modus (not DVD). To put into the HD modus just push the HD button on your recorder (not your remote). First change the command mode of your sony recorder to DVD1(manual page 23) and change it also your remote. Default is DVD3. Prepare your remote: 1. press dvd 2. press magic button (hat) and hold until rabbit pops-up 3. press 0533 (only for the commande mode DVD1) The IR blinks twice and you can now control the recorder with this remote Prepare the buttons 1.....5 (key magic) 1. press the magic button (hat) and hold until rabbit comes out 2. press 994. 3. press DVD 4. Press only once and short on Magic button (hat) 5. press 001891 (it might be necessary that you press the scroll button between some numbers) Repeat this procedure for 00255, 000953, 002214 and 000795. Last fase : reprogram your dvd recorder: 1. remove the disc and put the player on standby 2. press 1, 2, 3, 4, 5, with a brief pause between each button and make sure LED of the remote flashes The player should turn on and TIMER OK displays. Congratulations! Youre dvd recorder is now regionfree I didn`t need to press again 1 2 3 4 5 as mentioned in the other posts. | |||
![]() | |||
It also worked using all-in-one URC-8820-B00 First change the command mode of your Sony recorder to DVD1(manual page 23) and change it also your remote. Default is DVD3. Prepare your remote to work with the Sony recorder: 1. press DVD button 2. press SET button and hold until the LED flashes twice 3. enter 0533 The LED flashes twice to confirm it is set ok Now use the remote to verify it controls your recorder Program the keys 1.....5 1. press the SET button and hold until the LED flashes twice 2. enter 994. 3. press DVD button 4. press SET button once (Don’t hold it) 5. enter 001891 to program key 1 Repeat this procedure for 00255, 000953, 002214 and 000795 to program keys 2…5 Make your recorder region free: 1. remove the disc and put the player on standby 2. enter 1, 2, 3, 4, 5, with a brief pause in between The player should turn on and TIMER OK displays. Congratulations! Your recorder is now region free. |
1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!