What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
DVD Player | Hacks | Updated | Add |
Sony RDR-HXD710 | 4 user region code comments |
August 07, 2008 | Post region code/hack comment |
![]() | |||
As per most other Sony DVD players: See http://www.selen.org/sonydvd.html Others, on other forums have mentioned some features being disabled after other hacks. I haven't fully elpored my machine, but it works as it did before! Regards, Paul | |||
![]() | |||
http://www.selen.org/sonydvd.html I applied this hack using my laptop's IRDA port. No problems and no evidence of features going awry. | |||
![]() | |||
I used the ONE FOR ALL remote (URC-7562) Use the Key Magic instructions on last page of the remote manual. 1)Put SONY DVD player in standby mode with red light on 2)Type DVD Key on the One for all remote 3)Type and hold Magic Key until two blinks then type 994 4)type Magic key 5)Then type 189 and 1 on the remote (to assign function 189 to the "1" Key)you see two blinks 6)repeat steps 3 and 4 7)Then type 255 and 2 on the remote (to assign function 255 to the "2" Key)you see two blinks 8)repeat steps 3 and 4 9)Then type 095 and 3 on the remote (to assign function 095 to the "3" Key)you see two blinks 10)repeat steps 3 and 4 11)Then type 221 and 4 on the remote (to assign function 221 to the "4" Key)you see two blinks 12)repeat steps 3 and 4 13)Then type 079 and 5 on the remote (to assign function 079 to the "5" Key) you see two blinks NOW COMES THE FUN PART Your player in standby mode use the One for all remote Type keys 1 2 3 4 5 in sequence Player displays TIMER OK Other lists say that you may need to repeat the key sequence (see rdr hx710) I tried with region 1 and 2 and it works like a charm. | |||
![]() | |||
I used the Kameleon 3 all-in-one and the below mentioned procedure worked perfect for my RDR-HX910. Attention : I first did put a region 1 DVD and waiting until I got the code that it was blocked for region reasons. Then I did put my recorder in the HD modus (not DVD). To put into the HD modus just push the HD button on your recorder (not your remote). First change the command mode of your sony recorder to DVD1(manual page 23) and change it also your remote. Default is DVD3. Prepare your remote: 1. press dvd 2. press magic button (hat) and hold until rabbit pops-up 3. press 0533 (only for the commande mode DVD1) The IR blinks twice and you can now control the recorder with this remote Prepare the buttons 1.....5 (key magic) 1. press the magic button (hat) and hold until rabbit comes out 2. press 994. 3. press DVD 4. Press only once and short on Magic button (hat) 5. press 001891 (it might be necessary that you press the scroll button between some numbers) Repeat this procedure for 00255, 000953, 002214 and 000795. Last fase : reprogram your dvd recorder: 1. remove the disc and put the player on standby 2. press 1, 2, 3, 4, 5, with a brief pause between each button and make sure LED of the remote flashes The player should turn on and TIMER OK displays. Congratulations! Youre dvd recorder is now regionfree I didn`t need to press again 1 2 3 4 5 as mentioned in the other posts. |
1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!