What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
| DVD Player | Hacks | Updated | Add |
| Sony DVP-SR760H | 5 user region code comments |
May 18, 2023 | Post region code/hack comment |
 Region code hack posted by tp5harp, September 11 2012: | |||
To perform this hack you need a OneForAll remote control. Here are the instructions for the OneForAll URC-7781 and the OneForAll 7040 remotes (I have the URC-7781 and it works ok with that, but I have not tested the 7040 remote). Any OneForAll remote should work providing you follow the principles detailed below. Programming the URC-7781 --------------------------- 1. Hold the Magic Key down for 3 Seconds 2. Select "Initial Setup" - Press Enter 3. Select "Device" - Press Enter 4. Select "Add Device" - Press Enter 5. Choose DVD from the list of choices - Press Enter 6. Select "Code Setup" - Press Enter 7. Enter Code 0533 - Press Enter 8. Press Esc until you get back to the Main Menu 9. Hold the Magic Key down for 3 Seconds 10. Cursor Right and select "Advanced Setup" - Press Enter 11. Select "Function" - Press Enter 12. Select "Add Function" - Press Enter 13. Cursor Right and select "Add Key Magic" - Press Enter 14. Cursor Right and select the newly added DVD Device 15. Press The Magic Button (Do not hold) 16. Enter the code 00189 (Once entered "KM Source" changes to "KM Destination" on the remote control display) 17. Press 1 to store this code against button 1 18. Press The Magic Button (Do not hold) 19. Enter the code 00255 (Once entered "KM Source" changes to "KM Destination" on the remote control display) 20. Press 2 to store this code against button 2 21. Press The Magic Button (Do not hold) 22. Enter the code 00095 (Once entered "KM Source" changes to "KM Destination" on the remote control display) 23. Press 3 to store this code against button 3 24. Press The Magic Button (Do not hold) 25. Enter the code 00221 (Once entered "KM Source" changes to "KM Destination" on the remote control display) 26. Press 4 to store this code against button 4 27. Press The Magic Button (Do not hold) 28. Enter the code 00079 (Once entered "KM Source" changes to "KM Destination" on the remote control display) 29. Press 5 to store this code against button 5 30. Press Esc until you get back to the Main Menu Programming the 7040 ---------------------- 1.Select DVD device on remote 2.Hold Magic button until DVD button flashes twice 3.Press 0, 5, 3 and 3 4.Put a disc in player and put player onto welcome screen 5.Hold Magic button down until DVD button on remote flashes twice 6.Press 9, 9 and 4 7.Press Magic button 8.Press 1, 8, 9 and 1 9.Repeat steps 2 to 4, then press 2, 5, 5 and 2 10.Repeat steps 2 to 4, then press 0, 9, 5 and 3 11.Repeat steps 2 to 4, then press 2, 2, 1 and 4 12.Repeat steps 2 to 4, then press 0, 7, 9 and 5 Once your remote control is programmed --------------------------------------- 1. Make sure the DVD player has no disc in it and is powered off 2. Press 1, 2, 3, 4, 5 on the OneForAll remote control. After a few seconds the DVD player will automatically turn on 3. Wait for the "No Disc" message 4. Press 1, 2, 3, 4, 5 on the OneForAll remote control. After a few seconds the DVD player will automatically turn off 5. The DVD Player is now Multi-region | |||
| Region code hack posted by ds3, August 21 2015: | |||
The instructions for the 7040 aren't entirely correct, it's actually a 7740 one for all remote you need and the instructions are as follows. I can confirm this definitely works. Programming the 7740 ---------------------- 1.Select DVD device on remote 2.Hold Magic button until DVD button flashes twice 3.Press 0533 4.Put a disc in player and put player onto welcome screen 5.Hold Magic button down until DVD button on remote flashes twice 6.Press 994 7.Press Magic button 8.Press 00189 and 1, button should flash twice 9.Repeat steps 5 to 7, then press 00255 and 2, flash twice 10.Repeat steps 5 to 7, then press 00095 and 3, flash twice 11.Repeat steps 5 to 7, then press 00221 and 4, flash twice 12.Repeat steps 5 to 7, then press 00079 and 5, flash twice Once your remote control is programmed --------------------------------------- 1. Make sure the DVD player has no disc in it and is powered off 2. Press 12345 on the OneForAll remote control. After a few seconds the DVD player will automatically turn on 3. Wait for the "No Disc" message 4. Press 12345 on the OneForAll remote control. After a few seconds the DVD player will automatically turn off 5. The DVD Player is now Multi-region | |||
| Region code hack posted by murmelwurmel78, December 13 2016: | |||
This hack does not work for me. I bought the One for All remote (type 7140). It can be programmed like the 7040. Once the programming is done the DVD player will power up and down using the 1, 2, 3, 4 and 5 keys. But the player is still not codefree. I didn't understand though, why the DVD player has to display the welcoming screen during the programming of the remote. How does this influence the programming? | |||
| Region code hack posted by Murat Camsiler, February 05 2021: | |||
To watch Region1 dvd in another region | |||
| Region code hack posted by Ajsela, May 18 2023: | |||
Hack information | |||
| 1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!