What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
| DVD Player | Hacks | Updated | Add |
| Samsung HT-C650W | 1 user region code comments |
May 13, 2011 | Post region code/hack comment |
 Region code hack posted by nicholasca, May 13 2011: | |||
Copied & Pasted from other Samsung Hacks. To change the DVD from region 1 (US territories and Canada) or any region code on Pg 8 of manual to region 9 (region free) 1. Ensure that there is no disk in the tray. 2. Switch the player off and press "Power" on the remote. This is necessary to clear/boot the firmware. 3. Wait until the main menu page appears. 4. Press "open/close" on remote allowing disc tray to open then press "open/close again. 5. As soon as the "No Disk" message appears at the top left corner do the following smoothly. 6. Press the "REPEAT" button and immediately enter your machine's corresponding region code: R1 (2 9 3 3 4) R2 (5 7 5 3 8) R3 (5 6 7 3 2) R4 (7 6 8 8 4) R5 (5 3 8 1 4) R6 (2 4 4 6 2) for the US 2 9 3 3 4 on the number pad, with about a 1/2 a second between presses. 7. Press "9" to make the player region free. Some hackers say wait 2 seconds. 8. Press the power button to turn it off, and then once more to turn it back on again (don't unplug) 9. Play a foreign DVD to verify the change. As mentioned by many other people, this hack is tricky because of the timing of entering the numbers and the general lack of feedback during the process. Keep trying and it will eventually work. Some hackers state that before pressing the 9, wait for your region code to appear in the top left corner, this did not happen for me but I continued regardless and the hack eventually worked. | |||
| 1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!