What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
| DVD Player | Hacks | Updated | Add |
| Samsung DVD-V1000 | 4 user region code comments |
May 17, 2005 | Post region code/hack comment |
 Region code hack posted by Andrew, November 04 2002: | |||
Always perform a COLD START before applying the hack below. This is an essential step. This hack can be used on player model v5000 as well. 1. Power on your player as normal. 2. Press and hold both the Play and Forward buttons on the player. 3. After a short while the words "No Disc" should appear from the onscreen display Release the Play and Forward buttons as soon as you see the words no disk. 4. First press the "Subtitle", then press the "Repeat" button on your remote control. 5. Using your remote control enter the code below, note that you must know what Region your player is currently set to in order to know which code is appropriate: - Region 1 use [ 2, 9, 3, 3, 4 ] - Region 2 use [ 3, 8, 7, 6, 7 ] - Region 3 use [ 5, 6, 7, 3, 2 ] - Region 4 use [ 7, 6, 8, 8, 4 ] - Region 5 use [ 5, 3, 8, 1, 4 ] - Region 6 use [ 2, 4, 4, 6, 2 ] 6. A code should be displayed at the upper left of the screen showing the current Region setting of your unit. 7. Press the "9" button on your remote control for Region free, or "1" for Region 1. Press "2" for Region 2, and so on. 8. Press the Open button on your player, put a DVD movie. Don't press CLOSE!!! 9. Press the Standby button on your remote control. 10. Press Standby again, and wait untill u see the Samsung Digitall logo, press the PLAY button, and here you go, your movie should start now. | |||
| Region code hack posted by jaimgc, May 15 2004: | |||
1.- cut power (I did for about 8 hrs.) I think this is COLD START, maybe take less. After pluggin again. 2.- power on your player with remote control. 3.- Press and hold both play and forward buttons on remote control. 4.- when words "no disc" appear release play an forward buttons. 5.- Press "subtitle" and after with your remote control the current region of your player. region 1 (2, 9, 3, 3, 4) region 2 (3, 8, 7, 6, 7) region 3 (5, 6, 7, 3, 2) region 4 (7, 6, 8, 8, 4) region 5 (5, 3, 8, 1, 4) region 6 (2, 4, 4, 6, 2) 6.- nothing appears, after the region code use the number of region you want to see, for example your dvd is region 4 use (7, 6, 8, 8, 4) and 1 and then your dvd is region 1 use "9" for region free. 7.- press open button on the remote,DON´T CLOSE 8.- put the dvd you want to see 9.- press on or standby button on your remote control. your dvd should power off. 10.- press on again and when you see samsung logo press play and is done. note 1: do this quick, I verified and tested 2 times and work perfect. note 2: my dvd is region 4 | |||
| Region code hack posted by J. Carr, March 26 2005: | |||
1. turn on dvd player, press dvd button 2. press subtitle on remote 3. press 76884 4. press 9 5. press open/close button on remote to open tray(very important) 6. press open/close button on remote to close tray 7. power off the power on all set.... all steps to be performed using remote control. | |||
| Region code hack posted by dan english, May 17 2005: | |||
region code 2 | |||
| 1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!