What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
| DVD Player | Hacks | Updated | Add |
| Samsung DVD-HD860 | 52 user region code comments |
December 08, 2008 | Post region code/hack comment |
 Region code hack posted by Fredo, April 02 2006: | |||
Hello, this hack is from HD-841 and also works with the HD-850. I've just (succesfully) tested it with a HD-860 from Best Buy. You will need a universal remote control (I used PM725S, $8.00 from Amazon but you can get it at Fry's, WalMart, etc.) You need to program the remote with the code 768 (Audio, AIWA). Once this is done: 1) Power on player 2) open dvd tray 3) Press "info/select" button on the Philips remote The message "Servo adjustment complete" will be displayed on the screen. 4) Press "9" on the Philips remote All the segment on the display on the front of the player will light up 5) Press "9" again on the Philips remote The LCD display on the front now says "open" 6) Close the tray. That's it, enjoy, your player is region free. Thanks to Sippeus (May 27 2005) for the HD-850 code and H. Cho (April 22 2005) for the original code. Also, if you can't find this specific remote (Philips PM752S Universal Consolidator), check the thread on the HD-850 since a number of other universal remotes are listed that accomplish the same hack. | |||
| Region code hack posted by Mike, April 04 2006: | |||
Using a Zenith ZN311 universal remote ($7.99 at K-mart..the Phillips that is recommended was $15!), input Aiwa code #687. 1. Press PREV CHAN/REPEAT button 2. TV will display Servo Adjustment Complete (LCD will not display adjust as reported on other models) 3. Press 3 key on Zenith remote twice 4. Power off and back on, should be region free. Did not check HDCP. I also noticed if you use Aiwa code 786, you can get a menu that displays the current firmware version, region, and HDCP status. I'll try that again now that I have the region free disabled. | |||
| Region code hack posted by roberto, April 07 2006: | |||
The region free code works but it does not work to disable HDCP which is what I need to be able to display to my projector. I use Fredo's hack with Philips universal PM435s from Walmart. I cannot try the HDCP only hack mentioned in the HD850 thread because the new remote does not have the angle key. Any suggestions? | |||
| Region code hack posted by Serg, April 07 2006: | |||
You also can use Philips universal - P435S. I baught this remote in Walmart - $9.96. Before you program make sure your TV is ON to be able see the message. Program AUDIO AIWA - CODE 786 on DVD selection(button). I tried on TV selection but did not get the result may be because I forgot to turn TV on to see the message. Anyway. After you done to program the remote follow next steps the same as listed in the previous hack. 1) Power on player 2) open dvd tray 3) Press "info/select" button on the Philips remote The message "Servo adjustment complete" will be displayed on the screen. 4) Press "9" on the Philips remote All the segment on the display on the front of the player will light up.----On my I had all ZEROS. 5) Press "9" again on the Philips remote The LCD display on the front now says "open" 6) Close the tray. Now your player is region free. I believe you can use any remote that lists a code with combination of 7,8,6. | |||
| Region code hack posted by Phil......, May 13 2006: | |||
Samsung DVD-HD850 Region Code Crack Use the supplied DVD player remote Remove any disc from the player Read the message NO DISC Press REPEAT button Press 76884789 Open the tray and insert a different region code disc Press play The player becomes multi region and has played zones1,2,3,4 discs. Works fine 14/5/06 | |||
| Region code hack posted by lwt, May 15 2006: | |||
Same with above, but with GE Universal, RM24927 or RM94927 Code: Audio, AIWA(839) Button to display "Servo adjustment complete": Vol > Button to turn on all segments: PIP/FRONT | |||
| Region code hack posted by sadf, May 16 2006: | |||
If you have a ONEforALL URC 6011 (replaces 6 remotes) Enter code 1405 for Aiwa audio receiver. Then audio plus button will get the message 'servo adjustment complete' on the TV screen. hack proceeds as above try 99 or 33. Should be region unlocked without turning off, just close door. Tested from region 1 to region 2. | |||
| Region code hack posted by RF expert, June 11 2006: | |||
This is the code posted by "NP" for HD850 and works fine for a region 2 HD860 (thanks NP!) This works with the Samsung remote supplied with the DVD player. Turn on the Player with no disc on the tray. The tv screen and the dvd lcd will display "No Disk" 2. Press the "Repeat" key on the Samsung remote control 3. Press the keys: "5 7 5 3 8" on the remote. Number 2 appears on the screen for a short time. 4. Press "9". Number 9 is displayed on the screen. 5. Press the "Open/close" button in the remote. The tray will open. Leave it open for a few seconds. 6. Just press the "On/off" button in the remote. 7. You now have a multi-region dvd player!! | |||
| Region code hack posted by DW, June 22 2006: | |||
Region code hack posted by Fredo works. I successfully hacked my DVD player (region 1) using Philips universal remote (PM425S). | |||
| Region code hack posted by Boo, July 03 2006: | |||
Successfully hacked region 1 player with GE Universal, RM24918 or RM84918($9.99 at Target) Code: Audio, AIWA(839) Button to display "Servo adjustment complete": Vol > Button to turn on all segments: 99 | |||
| Region code hack posted by olivier, July 05 2006: | |||
I am in USA. Bought the DVD HD860 from Circuit City. I just succesfully made it multi region by using a universal philips remote from wallmart (4 in 1) pm435s. I used the code 786 (note NOT 768 as in previoous posts) I power on open tray push the info/select on remote for a second or so. then press 9 then press 9 again that is it. just tried star wars from the UK and the game from the uk, followed by a couple of dvds from the usa. all worked fine. | |||
| Region code hack posted by FulhamFrankie, July 22 2006: | |||
I am in USA. Bought the DVD HD860 from Best Buy. I just succesfully made it multi region by using a universal philips remote from Best Buy (5 in 1) PHDVD5 (around $14 I think) I used the code 786 I power on open tray push the info/display on remote once then press 9 for multi-region (The DVD display shows 88888) then press 9 again I powered off Am watching Crouching Tiger Hidden Dragon now Region 2 Disc | |||
| Region code hack posted by Jo Hack, August 19 2006: | |||
Just did the region free hack on my Samsung DVD-HD860 bought from Bestbuy. Used a Philips Universal 4-in-1 PM4S. Tune the controller to AIWA Audio code 786 Have the tray open. Push the info/select button on the remote and the message ServoAdjustment Complete will appear on the TV screen and the DVD player LCD will show 888888. Press 9 and then 9 again. Turn off and you can now play any region DVD | |||
| Region code hack posted by Laing, August 20 2006: | |||
8/20/06 I just bought Philips remote control P435S from walmart and I did what SERG. posted on april 07 2006 it did works beautifully. thanks a millions. | |||
| Region code hack posted by ja, September 14 2006: | |||
bought samsung hd860 at comp usa and bought phillips remote P435S at walmart. followed instruction ofSerg written April 7, 2005. Worked on first try without problems playing region 2 from japan | |||
| Region code hack posted by Hector Herrera, September 18 2006: | |||
I bought this DVD (Region 1) in CircuitCity on July. I use an Universal Remote Control RCA (RCU600WMS)that I bought in Walmart Mexico city for $9.99 Program CD AIWA - CODE 203 on DVD selection(button). After you program the remote follow next steps 1) Power on player 2) open dvd tray 3) Press "forward" button on the RCA remote The message "Servo adjustment complete" will be displayed on the screen. All the segment on the display on the front of the player will light up ---- On my I had all ZEROS. 4) Press "9" on the RCA remote 5) Press "9" again on the RCA remote 6) Close the tray. Now your player is region free. * When you press the reverse button instead of forward you can view a square colors in the screen. * When you press "select/ok" or "menu/prog" button, in the screen appears CLIPS auto-play (I don't know what is the meaning of this!!!) * When you press the "CH +" button, the color of the screen change blue deep to blue light ( I don't know what is the meaning of this!!!) I done this hack connect via component and HDMI-DVI because mi Plasma have DVI connection. Continue seeking HDCP free! | |||
| Region code hack posted by Samsung, September 21 2006: | |||
If the player is purchased in North America, you don't need to do anything. The player is set to play region 1 to 6 by the factory. But the format has to be NTSC not PAL. | |||
| Region code posted by alfmaz, October 03 2006: | |||
I found that you don't need to buy a remote use your Samsung remote Make sure the player is switched on, and is at the Samsung logo screen. Also check the tray is shut and that there's no disc in the player. Now press the REPEAT button on the remote, followed by a five digit code. This code is different depending on what region your player is *currently* set to: R1 - 29334 R2 - 38767 R3 - 56732 R4 - 76884 R5 - 53814 R6 - 24462 So for example if you have an R2 player, press REPEAT-3-8-7-6-7. If you've done this correctly (and your player is compatible with the hack), you should see a number at the top left corner of the screen corresponding to the current region. Now, pressing any number from 1 to 6 will change to the corresponding region. Or, press 9 for "auto-region" mode. Next, press OPEN/CLOSE to open the tray, followed by Standby (or DVD POWER) on the remote to close it and put the player into Standby mode. The next time you turn your player on, the new region will be set. Don't forget that if you want to hack it again, you'll need to use a different code, as listed above. If it's currently set to "region 9", use the code for the last *proper* region you set it to. | |||
| Region code posted by Rick1ne, October 07 2006: | |||
Tested REPEAT-57538-REPEAT on a region 2 HD860 and it worked fine. I am now looking into HDCP-free. I have a PDA with remote control software, and managed to get a Samsung DVD remote up with an 'angle' button. I followed the HDCP-free hack as documented in the HD850 section(ANGLE-4327-ANGLE-OPEN/CLOSE_TRAY), but do not have component wires to test it with. I suggest that someone using component wishing for HDCP-free should try it (using a PDA or universal remote set on Samsung-DVD). | |||
| Region code hack posted by david, October 24 2006: | |||
Modiffied from sadfs hack: I programed my remote to my polaroid 32" lcd to 1405 and modified his hack to work. Enter code 1405 for Aiwa audio receiver. Then "dvd menu" button will get the message 'servo adjustment complete' on the TV screen. then press 99 as the door opens. Should be region unlocked without turning off, just close door. | |||
| Region code hack posted by Silver Surfer, November 05 2006: | |||
DEAR FRIENDS, IT TOOK ME A LOT OF TIME AND PATIENCE, BUT I DID IT GOT A SAMSUNG HD860, JUST HACKED THE REGION WITH THE SAMSUNG REMOTE 00054D, I BOUGHT DVD PLAYER ON USA, REGION 1, I DID THIS, NOW I CAN SEE ANY REGION DISK ON MY DVD PLAYER. . . SO HERE IS HOW FIRST SET HDMI SEL BUTTON TO 480P, THEN OPEN TRAY NO DISK ON IT, PRESS INFO BUTTON, AND PRESS NINE, UNTIL NUMBER 9 APPEARS ON LEFT CORNER OF TV DISPLAY, THEN, TURN OFF DVD, THEN ON AND. . . . ENJOY FREE REGION LIFE. . . JE JE, I HOPE IT'LL WORK FOR YA'LL. . . SOME POST'S MAKE ME BUY A PHILLIPS PM'S UNIVERSAL CONTROL, THAT MY FRIENDS, DOES NOT WORK. . . SORRY TO TELL YOU. . . 9 BUCKS AWAY FOR ME. . . . HOPE YOU GET TO THIS FIRST. . .BYE BYE! | |||
| Region code hack posted by RightSaidFred, November 06 2006: | |||
Silversurfer CONFIRMED. Silversurfer's hack does work with the new HD860 to make it region free! I have tested and unfortunately, HDCP is still active. A hack is still needed to disable HDCP so that non-HDCP monitors can display the HD output. | |||
| Region code hack posted by Ian Cooper, November 07 2006: | |||
I can confirm that Silver Surfer's hack works. I've tried every other hack on this page and none of them work on my region 1 HD860 DVD player that I bought from Sears (I even bought a Philips P435S universal remote control to no avail). Perhaps the latest batch of HD860s have different firmware. Anyway, Silver Surfer's hack works perfectly, just as he described. I had to hit 9 a few times (I didn't know whether to keep it pressed or just hit it over and over), but that was the only hiccup. Thanks Silver Surfer - I'd just about given up and was about to buy another DVD that was already hacked, so you've saved me $100 or more. | |||
| Region code posted by EJ, November 18 2006: | |||
Thanks Surfer, It worked for me to using the Samsung 00054D RC. I had to press several times the 9 button and it worked. Region 4 DVDs play OK | |||
| Region code hack posted by dkguru, November 20 2006: | |||
Hi, Fredo's hack (First entry) work with the Universal Remote R5 as well: * Open tray * Use code Audio/AIWA/213 * Press volume down for Servo adjust * Press volume up twice * Close tray * Turn off, then on :-) | |||
| Region code hack posted by silicon valley player, November 24 2006: | |||
I also confirm Silver Surfer's hack works. I purchased a Samsung DVD-HD860 from TigerDirect ( $39 refurbished) on November 11. After pushing info button, I pushed 9 button but nothing happened. I just got "No disc" on screen. I pushed 9 button 4-5 times but didn't work either. #$%#$@!! I pushed 9 button so many times for about 10 seconds and I saw the number 9 is shown overlapped with "No Disc". I just want to let you know that you have to push 9 for a long time or push many times and don't be frustrated if you see "No disc" sign while pushing 9 button. | |||
| Region code posted by Hector Herrera, November 24 2006: | |||
I bougth the DVD in July in USA. Manage to have free region buying an Universal remote control RCA 6 in 1 (Wal-Mart 9.99 $) with the code 203 for a CD / DVD AIWA. After this corroborates SilverSurfer's hack with the remote control of the DVD. Now there buys a remote universal control for DVD with the key angle. I try all the manual and automatic codes for the DVD SAMSUNG to remove the HDCP. "Angle-4327-Angle" and nothing ... on screen the forbidden symbol appears when I press Angle but nothing. I try with the opened Tray, closed tray, with disc, without disc ... nothing happens... Any idea???? | |||
| Region code hack posted by wilson, November 27 2006: | |||
Forget all these overblown techniques. They are way too complicated and most don't work. Real simple: power on open tray push the info on remote once (with supplied remote) You will see numbers. then press 9 for multi-region. keep trying until you see the number 9 appear in upper left corner power off Power on Ready for action. Playing Fistful of Dollars on Region 2. | |||
| Region code hack posted by Winny the Pooh, November 27 2006: | |||
Use Philips universal -PM435S I bought that remote in Bestbuy -&9.99. 1) Power on the player. 2) Open DVD tray 3) Program the remote on DVD selectio mode. Enter 0786. Just 786 as were suggested in some posted hacks didn't work 4) Press "info/select" button on the remote The message "Servo adjustment complete" will appear on the screen. 5) Press 9 on the remote 6) Press 9 again 7) Close the dvd tray. Your DVD player is region free now | |||
| Region code hack posted by Willi Wonka, December 02 2006: | |||
wilson's hack posted Nov 27 worked for me. I bought my Samsung DVD HD860 from Best Buy last week and followed Wilson's instruction to the letter. So 1. Power on. 2. Open tray 3. Push the info button on the remote once (with the supplied remote). Numbers appear at the top of the screen. 4. Press 9 several times until the number 9 appears in the upper left corner. 5. Power off. 6. Power on. I inserted Charlie and the Chocolate Factory, a region 2 disc, and it works fine. Region 1 DVD's still work fine. Scrumdidliumptious! | |||
| Region code hack posted by fwmonkey, December 14 2006: | |||
Thanks Wilson. Straightforward and to the point. Changed my R1 to multi-region with no problem. | |||
| Region code hack posted by Frederic, December 25 2006: | |||
Thanks to Silver Surfer hack posted on November 05 2006, my DVD Player is now region free. Thanks dude, awesome | |||
| Region code hack posted by Brendan, December 31 2006: | |||
If you have the Phillips PM435S remote, and have select thed Aiwa 786 code, hit "Quit" and you get a screen that says "cold start completed" and has the firmware version, the region code and "HDCP: OK" at the bottom. The LCD on the player will say "CS:*" where * is the region your on and matched that displayed on the screen. This seems to reset the player. I don't know if this helps or not. | |||
| Region code hack posted by playdvder, January 06 2007: | |||
use hd860 remote(00054D) open tray(no dish) press INFO keep pressing 9 until you see 9c dish close tray you done enjoy save money save time | |||
| Region code hack posted by Joe, January 06 2007: | |||
Hi guys, Joe from Brazil speaking. I tried the hack with the 9s but no success no matter the way I did. The only hack that worked for me was the one posted by "alfmaz",in October 03 2006, and just using the remote control supplied with the equipament. I will repeat it here: "Make sure the player is switched on, and is at the Samsung logo screen. Also check the tray is shut and that there's no disc in the player. Now press the REPEAT button on the remote, followed by a five digit code. This code is different depending on what region your player is *currently* set to: R1 - 29334 R2 - 38767 R3 - 56732 R4 - 76884 R5 - 53814 R6 - 24462 So for example if you have an R2 player, press REPEAT-3-8-7-6-7. If you've done this correctly (and your player is compatible with the hack), you should see a number at the top left corner of the screen corresponding to the current region. Now, pressing any number from 1 to 6 will change to the corresponding region. Or, press 9 for "auto-region" mode. Next, press OPEN/CLOSE to open the tray, followed by Standby (or DVD POWER) on the remote to close it and put the player into Standby mode. The next time you turn your player on, the new region will be set. Don't forget that if you want to hack it again, you'll need to use a different code, as listed above. If it's currently set to "region 9", use the code for the last *proper* region you set it to." Thanks folks. | |||
| Region code hack posted by nakedlurker, January 07 2007: | |||
The info and then pressing 9's mod mentioned above worked great. This is with Region 1. Player bought in the USA | |||
| Region code hack posted by The Helper, January 17 2007: | |||
Hello every one i have spent a little time looking at the hacks for the samsung dvd-hd860. You dont need to get other remotes or any thing like this the player can be made all region including rce playback straight out of the box with the supplied remote see below for step by step how this is done. 1. With the dvd tray empty no disc in the player press the repeat key on the remote. 2. Press keys 5-7-5-3-8 in this order. 3. 2 will appear on screen now press no.9 on the remote for multi region. 4. Finally press repeat button again to store setting. 5. All done you can now play any region disc including rce encrypted discs also. This has been tested on over 300 ntsc discs due to me being a dvd collector enjoy your multi region samsung dvd-hd860 player. Kind regards The Helper | |||
| Region code hack posted by SauliR, January 17 2007: | |||
The Helper's Code works for region 2 (at least in finland), now the player can play region 4 discs, so, The Helper, CONFIRMED. 1. With the dvd tray empty no disc in the player press the repeat key on the remote. 2. Press keys 5-7-5-3-8 in this order. 3. 2 will appear on screen now press no.9 on the remote for multi region. 4. Finally press repeat button again to store setting. 5. All done you can now play any region disc including rce encrypted discs also. And thanks, too... | |||
| Region code hack posted by TheRonin, January 25 2007: | |||
This hack is for the Samsung dvd hd850 and hd860. * Turn on the dvd-player. * make sure there is no dvd in the tray. * hit the 'repeat' button. * enter the code for your current region R1 - 29334 R2 - 57538 R3 - 56732 R4 - 76884 R5 - 53814 R6 - 24462 (the current region code will flash at the top left of your screen) * enter the desired region code, 9 for code free. * eject the tray and enjoy! | |||
| Region code hack posted by astl, January 28 2007: | |||
The hack posted by wilson, November 27 2006 worked perfectly. I bought the player at Bestbuy (US - Region 1) and now it's playing regions 1 and 4 perfectly. Thanks Wilson! Real simple: power on open tray push the info on remote once (with supplied remote). You will see numbers. then press 9 for multi-region. keep trying until you see the number 9 appear in upper left corner (it will appear briefly and then the NO DISC message will show). power off Power on Ready for action. | |||
| Region code hack posted by Gregorio, January 30 2007: | |||
MR Wilson is right !!!! for Samsung HD-860 it works, don't waste your money bying generic control remotes!!!! This works with the remote control that comes with the DVD power on open tray push the info on remote once (with supplied remote) You will see numbers. then press 9 for multi-region. keep trying until you see the number 9 appear in upper left corner power off Power on Ready for action. It worked GREAT for region 4 | |||
| Region code hack posted by paramarine, February 10 2007: | |||
^ I just did this one also. Worked like a charm. Now watching region 2. | |||
| Region code hack posted by JS1000, March 18 2007: | |||
ATTENTION AUSTRALIAN (REGION 4) USERS! I have had some success. I closely followed the instructions below (sourced from http://forum.ecoustics.com/bbs/messages/2/51681.html). I can only confirm that my player now plays Regions 2 and 4, as they are the only formats I have. I entered all numbers fairly swiftly, and followed each step accurately. I hope this brings success to other HD860 users. Nutshell version (for Region 4 player) 1. Switch on with no disc in tray; ‘No Disc’ will appear in top left corner of TV. 2. Press ‘REPEAT’, followed by 7 6 8 8 4; the number '4' will appear in the top left corner. 3. Press ‘9’; the number '9' appears in place of the '4'. 4. Open tray and leave open for 15 seconds. 5. Press Power and unit will close tray and switch off. Done. Long version Make sure the player is switched on, and is at the Samsung logo screen. Also check the tray is shut and that there's no disc in the player. 1. Press the REPEAT button on the remote, followed by a five digit code. This code is different depending on what region your player is *currently* set to: 2. Enter the following info as pertaining to your Region. If your player was purchased in Region 1: Press the buttons 2, 9, 3, 3 and 4 on your remote control, in order one at a time If it was purchased in Region 2: Press the buttons 5, 7, 5, 3 and 8 on your remote control, in order one at a time, or, failing that 3,8,7,6,7 For Region 3 players: Press the buttons 5, 6, 7, 3 and 2 on your remote control, in order one at a time For Region 4 players: Press the buttons 7, 6, 8, 8 and 4 on your remote control, in order one at a time For Region 5 players: Press the buttons 5, 3, 8, 1 and 4 on your remote control, in order one at a time For Region 6 players: Press the buttons 2, 4, 4, 6 and 2 on your remote control, in order one at a time 3. The numbers 01 or similar current region code will be displayed on the top left of your onscreen display 4. Press the 1 button on your remote control for region 1, 2 for region 2, and so on, or 9 for multi-region playback NB: The above step may be time sensitive and need to be performed very quickly 5. Open your DISC tray and leave open for 15 secs. 6. After 15 seconds have elapsed, power off your player and the DISC tray will be closed and player shut off. 7. Power on player and it is now set to the new region code you chose in step 4 above Enjoy. | |||
| Region code hack posted by fsknfoxfield, April 18 2007: | |||
I can 100% confirm Silver Surfer's post on opening the regions on the Samsung HD860. It worked perfectly. I did not change the HDMI to 480 as I have no HDMI cable yet. Be-that-as-it-may, it worked perfectly. We live in the USA and have some dvd's from Japan. After using Silver Surfer's directions, all disks worked perfectly. I am very, "jazzed". Thank you Silver Surfer! Perfect! The other hacks with various codes using the remote provided with the unit did not work. And I wasn't going to go out and buy any universal remote. I really hope that all see Silver Surfers directions before purchasing any universal remotes. Thanks again! | |||
| Region code posted by Roy, April 28 2007: | |||
Hi, I tried all these hacks, none of them seem to work. Anyone know if they upgraded the firmware or something to disable this? | |||
| Region code hack posted by Robert De Niro, April 29 2007: | |||
Super simple hack for this model. I bought mine refurbished from ebay (region 1) This works with the remote control that comes with the DVD power on open tray push the info on remote once (with supplied remote) You will see some version number. keep pressing 9 for multi-region. keep trying until you see the number 9 appear in upper left corner power off Power on Playing some region 2 DVD for my daughther! Easiest hack ever. | |||
| Region code hack posted by Dan Mark, June 17 2007: | |||
Hi! Dan from Brazil here I just want to confirm that to unlock Brazilians Samsung HD860 you need to insert the code wrote by alfmaz on October 03 2006 It took me a long time to try all the codes in this page and with this POST I hope I Can save some work of the next readers. The code worked just fine for me. The Code follow below: With no DVD inserted, press REPEAT then insert the REGION CODE (for BRAZIL) 76884 You ll see the number of th actual region code on top left corner of the screen. Then press 9. Press OPEN / CLOSE button. Power it off Power it on. Thats it! Your Player is now Region Free. Thanks to all by sharing this information! Best regards Dan MArk | |||
| Region code hack posted by Rodrigo, July 18 2007: | |||
Hi, Rodrigo from Brazil here! (Region code 4) I bought mine yesterday and applied this hack succesfully: -Turn on (on the remote) -Wait until appears "no disc" -Open and shut the tray -Wait for "no disc" again -Press REPEAT -Press 76884 (for region 4. I guess that to other regions the codes quoted in others topics above will apply) -When appears the number 4 on TV screen, press number 9 -Press ENTER Now you have a region free player! | |||
| Region code hack posted by Corey, August 08 2007: | |||
Just wanted to add that I bought a new HD860 and the listed cracks didn't appear to work since no numbers ever appeared on the screen, but then when I put in a region 6 disk it worked just fine. I think the Silver Surfer hack was the one that did the trick. | |||
| Region code hack posted by d4vem, December 12 2007: | |||
I purchased my 860 in the UK, bought it to the US and using Silver Surfers hack, DVD's all play perfectly. I do have to question as to whether or not anyone has tried this hack to see if it plays HD DVDs? Reason for asking is that I've just purchased my first HD DVD (Region 1) and it won't play, reporting "This disc can not be played". The disc works fine in other HD DVDs. I've tried re-applying Silver Surfers hack, but instead of keeping the '9' button down (taking this to be all regions) I kept the '1' button down (assuming to set the player to Region 1 and see if it would then play the HD DVD) - unfortunately no '1' appeared in the top left hand side of the screen. | |||
| Region code hack posted by khkim, November 03 2008: | |||
Dear Silver Sufers, I succeeded to hack the region code of my Samsung DVD-V9800 DVD/VCR combo using your method. I'll post it to DVD-1080P, DVD-V9700, and DVD-9800. Thank you and god bless you. | |||
| Region code hack posted by westport22, December 08 2008: | |||
Just want to say thanks to JS1000 hack. I have tried every single one on here and was about to give up but gave it one last try. Im in Australia and just as i was about to throw the remote at the telly! It worked! The short instruction one worked on the final attempt! Now can watch UK and US dvds totally fine! Never posted before but joined this just so I could say thank you! | |||
| 1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!