What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
| DVD Player | Hacks | Updated | Add |
| Panasonic DVD-S27 | 6 user region code comments |
February 12, 2025 | Post region code/hack comment |
 Region code hack posted by Calzontzin Toscano, May 28 2005: | |||
English Multi-Region: Turn On player with no disc inserted While pressing Shift on the remote press Setup Press Enter twice Move the cursor to Other Enter the appropriate four-digit region setting, beginning with 000 Press Enter Press Return twice Switch unit Off for at least 3 seconds Español Multi-Region: Encienda su Reproductor sin Insertar Disco Presione la Tecla Setup en el Control Remoto Presione la Tecla Enter Dos Veces Mueva el Cursor al Apartado Other Entre los Cuatro Dígitos de la región, Empezando con 000 Presione Enter Presione Return Dos Veces Apague el Reproductor al Menos 3 segundos | |||
| Region code hack posted by Nick, June 08 2005: | |||
Ditto to Andrew CJ, there is no shift button, has there been a problem with the translation here? About the 4 digit number, which number do you refer to? Or as in my case being a region 1 DVD, do I just precede "1" with "000"? PLease clarify anyone. Will the hack work with region 1? | |||
| Region code hack posted by paul, September 13 2005: | |||
This hack doesn't work, there is no setup button on the remote and after translating it it's not part of the original instruction anyway. This simply adjusts the audio it's not related to the DVD region coding. | |||
| Region code hack posted by ts, December 16 2005: | |||
The following works on a region 4 player. With no disc in the player and the drawer closed, press stop, stop, setup, then 3,8,8,8,3 and the desired region code, (0 for multiregion). Nothing will appear on screen. Then switch the player off and back on. It should now play discs for any region. | |||
| Region code hack posted by travelgreen, September 02 2009: | |||
Need Hack code for Panasonic S27 regional code | |||
| Region code hack posted by 1planet1region, February 12 2025: | |||
Same "10 key presses" as for Panasonic S52. Tested on region 1 S27 player. Use 2 remotes -- the Panasonic DVD remote (EUR7617010, n2qahb000012, or EUR7617020, etc) that came with the s27 dvd player and a OneForALL remote (used a URC 2981 but others should work). 9 of the required buttons are on the Panasonic remote so only a single feature needs to be programmed into the OneForAll. First set the OneForAll for basic control (on/off, play, etc but no open/close) of a Panasonic s27. Wait for the blinks to happen before continuing. On the OneForAll press these buttons DVD, Magic (2 blinks), 0490 (2 blinks). Make sure it controls the dvd player. Next, program the "service key" into the OneForAll's 0 button by pressing Magic (2 blinks), 994 (2 blinks), Magic, 001430 (2 blinks). Turn the S27 on and wait for "no disc" on front panel. Then press the keys on the 2 remotes in this order Panasonic remote: ENTER, 6, ≥10, << OneForAll remote: 0 panasonic remote: AUDIO, 8, 1, SUBTITLE, 4 Player turns itself off, then back on automatically. It now plays dvds from any region (ntsc or pal). No blurays. | |||
| 1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!