What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
| DVD Player | Hacks | Updated | Add |
| Panasonic DVD-A350 | 4 user region code comments |
September 21, 2019 | Post region code/hack comment |
 Region code hack posted by Stefanutti, January 07 2003: | |||
I bought the DVD in Italy. Panasonic A350. Press the following keys on the remote: Setup 4 >= 10 8 8 7 3 Press: 5001 (for ntsc output) or 5002 (for pal output) Select Select At this point you should get this message: OUTPUT:INITIALIZED Additional notes: - The first time I have tryed the hack the DVD I used the sequence for the pal output (pressing 5002 from the hidden menu) and the hack worked fine. But, some DVD I had, still continued not to work (only some english titles. Italian ones were fine). Since I had a TV able to read ntsc signal (almost all the modern TV do) I have tryed the hack using the 5001 (ntsc) sequence. With this sequence I am able to play all the DVD I have both Italian and American with no limitation. Enjoy. | |||
| Region code hack posted by sortitout, February 19 2005: | |||
This won`t work unless you have the service disc in your machine first! | |||
| Region code hack posted by George Z, June 23 2005: | |||
With no disk inserted. Press the following keys on the remote: Setup 4 10 8 8 7 3 Press: 5001 (for Region free) or 5002 (for region2) Select Select This message will come on the screen: OUTPUT:INITIALIZED | |||
| Region code hack posted by Astral_RO, September 21 2019: | |||
For Yamaha DVD S-795 : Suddenly, my dvd refused to play my dvd`s, no matter the region of the disc! None of the codes that I read on the internet worked for me, including those posted on this site. The one and only method was to get the dvd player back to factory settings as it is described in the owner`s manual : "Reset all the settings to Factory Preset. While the player is in the stop mode, hold the player’s SKIP (H) button and the PAUSE button down simultaneously and then hold the OPEN/CLOSE button down for longer than 3 seconds (until “Initialized” disappears from the TV monitor). The lock will be released and all initial settings will return to the default values." | |||
| 1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!