What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
DVD Player | Hacks | Updated | Add |
Oritron DVD650 | 8 user region code comments |
December 23, 2002 | Post region code/hack comment |
![]() | |||
VCD Enablement/Region code hack VCD Enablement: (with music CD loaded) STOP MENU 1 INDEX OPEN (then specify to enable or disable VCD playback) Region Enablement: (with NO disc in player) MENU 1 6 7 (then specify the region code 1 through 6, or MUTE for region 0) | |||
![]() | |||
Tried the suggested region hack (menu->1->6->7->0) and got locked - could not identify zone1 DVDs anymore - any suggestions? | |||
![]() | |||
Possible Macrovision hack Press "Menu" Press "2" Press "4" Press "6" Then Press "1" to unlock dealer lock | |||
![]() | |||
VCD Enablement/Region code hack VCD Enablement: (with music CD loaded) STOP MENU 1 (or 9 for US models) INDEX OPEN (then specify to enable or disable VCD playback) | |||
![]() | |||
This feature locks and unlocks the DVD drive to prevent opening and closing. Powering off and on did not undo this feature. Press "Menu" Press "2" Press "4" Press "6" Then Press "1" to unlock dealer lock Also, I went searching for some hacks and found clue to searching for hacks. Apparently, when you are in the "Menu", none hack-buttons cause the icons to blink while hack-buttons do not. So incorrect button combinations will show up as a short blink of one or two of the icons. | |||
![]() | |||
this is a working vcd enable hack, note that my firmware on my oritron dvd650 is 5 -place music CD in dvd ,press stop, press menu, press 1, press button to the right of the pause button -press eject a vcd enable menu pops up all done off the remote, sorries i didnt know the name of the button right of the pause button at the time i wrote this but im sure this works | |||
![]() | |||
I have figured out a secret combination of keys on the front panel of the unit: switch on the DVD player while pressing the PLAY key (on the front panel). You will see that the unit is starting a sort of test with all kinds of messages being shown up on the display.I guess this also works for Oritron DVD 200, 600 and other similar DVD player based on the STI558 chip (or so). You could to the same thing while pressing both play and stop buttons and check what is happening. MAYBE SOMEBODY OUT THERE CAN FIGURE OUT HOW TO DISABLE ONCE END FOREVER THAT ANNOYING MACROVISION | |||
![]() | |||
It appears that holding PLAY when powering the unit ON will erase some changes made with other "hacks". My screen says "ERASING EEPROM" (which is where the changes are stored). Also, with no disc in the player, pressing these keys: MENU 1 7 AUDIO allows you to Disable or Enable Dolby 5.1 sound. (If it is disabled, it will not be an option in the normal menu.) |
1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!