What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
| DVD Player | Hacks | Updated | Add |
| JVC XV-N5 | 4 user region code comments |
July 02, 2006 | Post region code/hack comment |
 Region code hack posted by Tuthur, April 07 2003: | |||
So far, I haven't managed to find the hack for my JVC XV-N5, but I found some interesting things which could be one of the firsts steps. Plugging and Powering from the player while holding I<< and >>I displays this : "REGION 2" ************* Plugging the player while holding Play and Stop, does this : "TEST --" then displays "TEST E" When pushing the Choice key on the remote, it displays this : "23 56 13" Pushing again does this : "- - - - - - - -" Again : All LCDs lit Again : "CHECK" Again : "EXPERT" When "EXPERT" lite, pressing 3D Phonic on the remote does this : "0000 0000" Then pressing Subtitle does this : MJMO DEOF Then when pressing Angle or Subtitle again we can simultaneously read : "MJMO DE10", "MJMO DE09", "MJMO DE08"... and "MJMO DEOA", "MJMO DEOB"... Pressing 3D Phonic again does this : DATA 0000, then pressing Angle or Subtitle does things like "MJMO DEOD" Pressing Menu does : "0000 0000" Now, pressing numbers button on the remote, changes 0000 0000 into many different codes, at this moment I think it is better not to press Enter, some wrong codes could be entered and I did not find how to enter 0000 0000 again. When switching off and on again (without validing anything), the player keeps its keys. Well, I hope that this small discovery will help some us to eventually figure out the hack for this player. Good luck. | |||
| Region code hack posted by sharon, July 20 2003: | |||
Posted - 14/11/2002 : 09:35:59 -------------------------------------------------------------------------------- 1. Press the Power button on the player to turn it off 2. Wait 5 seconds 3. Press and hold the buttons DVD Menu and On Screen on the player together, and then press the Power button on the player to turn it back on 4. Release the DVD Menu and On Screen buttons 5. Press the Standby button on your player, the display should now show either "TEST 2", "TEST 4" or "TEST 6" depending on the player region 6. Press the DVD Menu button on your player twice in a row, the display should now show "000 5858" 7. By pressing the Up and Down cursors buttons, change the first three digits until they read "02E" 8. By pressing the Right and Left cursors buttons, change the last four digits until they read "0000" for Region Free, "0101" for Region 1, "0202" for Region 2, "0404" for Region 4, "0808" for Region 8, and finally "2020" for Region 20. 9. If you experience difficulties with Region 4 discs, change the above setting to "0458" and make sure that PAL or NTSC is correctly set on your player 10. Press the Enter button on your player to confirm the region change 11. Press the Standby button on the player to turn it off 12. Wait 5 seconds 13. Press the Standby button on the player to turn it on | |||
| Other hack posted by Amaru, February 26 2004: | |||
Does the hack Sharon provided work...? last comment was Help...? | |||
| Region code posted by Jack Hoeydal, July 02 2006: | |||
The above hack does not work on this player, have tried numerous times but with no success. | |||
| 1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!