What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
| DVD Player | Hacks | Updated | Add |
| GoVideo DV1130 | 4 user region code comments |
March 16, 2005 | Post region code/hack comment |
 Region code posted by Jack, April 11 2004: | |||
Same as 2130 2140, it works great! The followings are copied from the 2130 hack info. ------------------------------------------------- like the zenith dvb312 hack VCD (tested) 1) Power up with NO cd in the drive 2) Press PAUSE 3) Press 1472 4) At the EEPROM screen write down the code for backup (Mine was 55 53 00 45 16 05 64 00 00 00 C0 C0 20 00 03 50) **Use the left and right arrows on the remote to move **Press the number keys on the remote for number entry **Press and hold numbers 1 thru 6 for letter entry 5a)If you want to enable VCD AND disable Macrovision: Enter: 55 53 00 47 .... 6) Press PAUSE to exit the EEPROM screen 7) Press POWER to turn the unit off 8) Press POWER to turn the unit on 9) Insert VCD disk 10)Press PLAY when ready | |||
| Region code posted by heat84, July 09 2004: | |||
The person who posted this hack only posted part of the code modifications. Heres the full codes: VCD/SVCD on, Macrovison off: 55 53 00 47 14 55 FE FF or 55 53 00 46 14 55 FE FF. VCD/SVCD on leave Macrovision alone: 55 53 00 47 14 55 64 FF or 55 53 00 46 14 55 64 FF I got the full codes from the Zenith DVB312 hack page. BTW, I tried the first code for VCD/SVCD on, Macrovision off and it worked. | |||
| Region code hack posted by clw, September 10 2004: | |||
I just got a GoVideo DV2130 and it does not play VCD. I tried the above hack, but it doesn't work for me; pressing pause (from both the remote and front panel) for me doesn't do anything other then report that there is no disk. I could only type in two digits. I was pressed ENTER after the first two digits. I was not able to bring the EEPROM on screen. I called GoVideo tech support. He seemed to say it could be done but he could not tell me because of the company policy. I would appreciate if there is someone who would respond to this message and show me in detail how to bring up the EEPROM on screen and how to make it play VCD (and also turn macrovision off). Thank you | |||
| Region code hack posted by leslie, March 16 2005: | |||
I just got a GoVideo DV2130 and it does not play VCD. I tried the above hack, but it doesn't work for me; pressing pause (from both the remote and front panel) for me doesn't do anything other then report that there is no disk. I could only type in two digits. I was pressed ENTER after the first two digits. I was not able to bring the EEPROM on screen. I called GoVideo tech support. He seemed to say it could be done but he could not tell me because of the company policy. I would appreciate if there is someone who would respond to this message and show me in detail how to bring up the EEPROM on screen and how to make it play VCD (and also turn macrovision off). Thank you | |||
| 1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!