What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
| DVD Player | Hacks | Updated | Add |
| DiViDo | 6 user region code comments |
June 18, 2002 | Post region code/hack comment |
 Region code hack posted by har, May 19 2001: | |||
Press (on remote): open - setup - 9 - 4 - 0 - 1 - 0 - step - shuffle - next Turn on and off and all regions are supported. Specific region: replace the '9' with a '1', '2' ... etc for the specific region | |||
| Region code hack posted by Patrique, May 19 2001: | |||
If your DiViDo is bought before the 1st of november 2000 you can do the folowing: 1. Connect the DiViDo with your TV and choose the right channel on your TV. 2. Activate the DiViDo without placing a DVD in it. 3. Place the batteries in the RC and push 'SET-UP' once. 4. After that you push 'TITLE' once. 5. After that you push 'STEP' once. 6. After that you push 'NEXT' once. 7. Now you've activated a hidden menu of the player and it is possible to change different settings like the region! 8. Now it's possible to play DVD's from every region! Have fun! If your DiViDo is bought after the 1st of november 2000 you can do the folowing: 1. Connect the DiViDo with your TV and choose the right channel on your TV. 2. Activate the DiViDo. 3. Place the batteries in the RC and push 'OPEN' once. 4. After that you push 'SETUP' once. 5. After that you push: 9 - 4 - 0 - 1 - 0 - (like this: 94010) 6. After that you push 'STEP'once. 7. After that you push 'SHUFFLE' once. 8. And last but not least you push 'NEXT' 9. Now, if you deactivate and activate your DiViDo it will be free of regions, so you can watch all DVD-movies! If you only want to set 1 particular region, for example region 1, you'll have to do the same programmingsequence, but instead of the 9 in step 5 you'll place 1 (for region 2 ==> 2, etc.) You can check which region-code is set in your DiViDo at the moment. Take your RC and push: 'OPEN' 'SETUP 'SHUFFLE' 'STEP' 'NEXT' . Now you've got a hidden menu and at the bottom you can see at 'DEBUG' the region that has been set. Regionfree is '9' Good luck!! This "hack" was taken from the official site of the Dutch importer of the DiViDo DVD-player! | |||
| Region code hack posted by Karl Lovink, June 26 2001: | |||
Firmware version check: SETUP Volume+ Secret menu: OPEN-SETUP-SHUFFLE-STEP-NEXT Current Region setting is visible at the bottom, no change possible using this screen. Change Region: OPEN-SETUP-N-2-0-0-0-STEP-SHUFFLE-NEXT N represents the region to set, 9 bypasses region check. No prob with RCE. Macrovision off: SETUP-STOP-TITLE-PREV-SETUP Set this, while disk is running, stays like that until player is set into standby mode. Raise volume using line out: SETUP-STOP-STEP-TITLE Raise volume using SCART: SETUP-STOP-STEP-ANGLE | |||
| Region code hack posted by Urben Stan, August 22 2001: | |||
Macrovision completly/always off. Press; SETUP, STEP, TITLE, PREV and then turn the player off. | |||
| Region code hack posted by Snake, January 09 2002: | |||
To set region code perminantly !!!!!!! 1) turn on player 2) press: open, setup, 9,4,0,1,0, step, shuffle, next 3) turn off and on (i cant remember if i turnd off and on ?) so first skip this, but go out of the setup !!!!! 4) press: setup, step, shuffle, next (secret menu) 5) go to 'DEBUG' and select the region u selected before (i used 9, so select 9 and press 'sel' to set it) 6) turn off and on, and it should be fixed now, check it by going into the secret menu again ! p.s. after step 5, i did step 2, but i dont think u need to do it !! | |||
| Region code hack posted by Flipje, June 18 2002: | |||
After updating you firmware to 2.36 and is turned back to the default setting the code has changed... With Scan Firmware v2.36 it is now: open, setup, 9,2,0,1,0, step, shuffle, next It worked with mine... | |||
| 1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!