What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.
| DVD Player | Hacks | Updated | Add |
| Denon DN-V300 | 3 user region code comments |
April 26, 2005 | Post region code/hack comment |
 Region code hack posted by Bob, April 26 2005: | |||
Region Free for an NTSC TV 1. Turn the unit on. 2. Press the “OPEN/CLOSE” button and open the tray. (Keep the tray open during the setting.) 3. Press “CLEAR” “1” “4” “7” “0” “CLEAR” - “TEST MODE” will appear on the display. 4. Press the “▲”cursor key and “00 XX” (XX=this will be a numerical value) will appear on the display. The first two digits are incremented by one, every time you press “▲” 5. Press the “▲”cursor key until you see 12 XX (default is 24) on the display. Press “2” 3” on the remote then the “ENTER” button 6. Press the “▲” cursor key again and you will see 13 XX (default is 23). If it does not say “23”, Press “2” “3” on the remote and then the “ENTER” button 7. Press the “▲” cursor key again and you will see 14 XX default is 01). Press “0” “0” on the remote and then the “ENTER” button. 8. Press “RETURN” 9. Press “CLEAR” twice 10. Press “RETURN” (END should appear on the display) 11. Press the “OPEN/CLOSE” button to close the tray. Region Free for a PAL TV If you have a PAL TV follow all the steps but use “33” instead of 23 in steps 5 and 6 | |||
| Region code posted by Bob, April 26 2005: | |||
For the previous hack “▲" should be the "up" arrow on the cursor. | |||
| Region code hack posted by videoguru, April 26 2005: | |||
This is the correct hack: Region Free for an NTSC TV 1. Turn the unit on. 2. Press the “OPEN/CLOSE” button and open the tray. (Keep the tray open during the setting.) 3. Press “CLEAR” “1” “4” “7” “0” “CLEAR” - “TEST MODE” will appear on the display. 4. Press the “up”cursor key and “00 XX” (XX=this will be a numerical value) will appear on the display. The first two digits are incremented by one, every time you press “up” 5. Press the “up”cursor key until you see 12 XX (default is 24) on the display. Press “2” 3” on the remote then the “ENTER” button 6. Press the “up” cursor key again and you will see 13 XX (default is 23). If it does not say “23”, Press “2” “3” on the remote and then the “ENTER” button 7. Press the “up” cursor key again and you will see 14 XX default is 01). Press “0” “0” on the remote and then the “ENTER” button. 8. Press “RETURN” 9. Press “CLEAR” twice 10. Press “RETURN” (END should appear on the display) 11. Press the “OPEN/CLOSE” button to close the | |||
| 1 DVD Hack hits, Showing 1 to 1 DVD Hacks |
New hacks = New region code/hack comments since your last visit. Visit our sponsors! Try DVDFab and backup Blu-rays!