DVD Hacks » Curtis DVD1041 region code

Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes. Use them at your own risk.

What are Blu-ray and DVD region codes, country codes, multi-region or zone locks? Read DVD Player region codes and Blu-ray region codes.

Search DVD Player:

Hits per page:

DVD Player	Hacks	Updated	Add
Curtis DVD1041	15 user region code comments	February 03, 2015	Post region code/hack comment
	Region code hack posted by PTYSIO, June 11 2010:
	I just bought Curtis 1041 DVD at K-mart ,Chicago. Trying some combinations from previous models I accidently hit the right one , works perfect for my region 1 and 2 and possibly other regions. It also plays PAL on NTSC TV !!!. Here are the steps : - DVD must be empty and turned off, use REMOTE control. - put it ON - OPEN try - press 9999 fast(nothing apears on the screen) - and press 9 fifth time ( it be 9 on blue bacground, for two seconds , and disapears) - close the try , DVD is ready to go any region , any tv system . Enjoy. p.s. it took me few times , since the timeing seams to matter ,so if doesn't - try again .
	Region code hack posted by DCdenizen, June 13 2010:
	I purchased the Curtis 1041 in Maryland on June 13, 2010. PTYSIO's hack worked like a charm on first try. Region 2 PAL cds from UK and Israel play perfectly. - DVD must be empty and turned off, use REMOTE control. - put it ON - OPEN try - press 9999 fast(nothing apears on the screen) - and press 9 fifth time ( it be 9 on blue bacground, for two seconds , and disapears) - close the try , DVD is ready to go any region , any tv system .
	Region code hack posted by Chillyvanilla, October 16 2010:
	Worked like a dream :- 1. No disc in draw 2. Press 9 5 times 3. Ready for multi region play back I have some uk DVDs and they now work thanks nick
	Region code hack posted by jasonnjane, November 26 2010:
	i have tried to unlock the dvd i have just purchased the way it was described although nothing is happening, any advise would be greatly appreciated many thanks
	Region code hack posted by aca_yu, December 10 2010:
	The same as for Curtis 1098B: 1. Open empty disk tray. 2. Enter 9999 on remote. 3. Enter 0 (means no region). 4. Close disc tray. Checked and worked with region 2 discs. Should work with all.
	Region code hack posted by skydropco, March 03 2011:
	None of these hacks have worked on my 1041. I just bought it at Walmart and have noticed the design is completly different to the models I see online.Time for an update on the model maybe...it says on the box 1041C.
	Region code hack posted by markybecks, March 04 2011:
	Seems to work on the Curtis DVD 1041C Press SETUP Press 9999 The number 1 will appear in the top right of the screen in the yellow bar for language setup. Press the Right Arrow Key and you scan scroll through numbers 1-6 then 255 appears. Hit SETUP twice to get out of that menu. I presume numbers 1-6 are the regions and 255 is all regions? But set on 255 or 2. It plays all my region 2 UK DVD's. Bargain! Machine only $17 from Walmart!
	Region code hack posted by skydropco, March 05 2011:
	Result! Thank you markybecks finding the lost code! Foolheartedly though, I went and bought a Coby no-region player on Ebay yesterday...I honestly did'nt expect to get a new hack so quickly....oh well, you live and learn.
	Region code hack posted by gniboricua, May 10 2011:
	This one worked for me -DVD Player Off Do this with your remote -Turn it on -Open tray -Hit 9999 plus whatever region you want (1 to 6)and you will see the number on top of the screen. For All Region press the 0/10 button. Hope this helps!!!
	Region code hack posted by Bazza228, May 12 2011:
	Went to Kmart and bought the player for $29us here in Mississippi (May 2011). Followed instructions to the letter. Hack worked straight away as shown. Popped in my "New Tricks season 5" from England and it plays beautiful on my telly. THANK YOU.
	Region code hack posted by Brianwuz, September 12 2011:
	I picked up a DVD1041 today at Kmart. There was a 1041 and a 1041B. I chose the 1041. After hooking it up I put a region 2 disc in to see it fail before entering the codes and it played. Put in another disc and it played also. It is a region 1 player and played region 2 right out of the box. Maybe this is just the first version of the player that does this.
	Region code hack posted by SarahLT33, December 12 2011:
	Have tried every hack listed here for the curtis dvd1041 model and none are working. Perhaps it's been updated and none of these hacks apply. Any additional hacks would be greatly appreciated.
	Region code hack posted by faymerochelle, March 01 2012:
	region 1 to region 2
	Region code hack posted by P Senecal, March 26 2012:
	FAILURE TRYING to hack the Curtis DVD 1041 B marked zone 1 for viewing a zone 2 dvd movie from France. No hack with above methods on a Walmart bought Curtis DVD 1041B, in Montreal February 2012. I tried TO NO AVAIL the 9999/9 code the 9999/0 (10 ) code and the 9999/2 code. The dvd player was not really hacked because it was very slow trying to load and at times would completely freeze, or show vertical black and white stripes (had to unplug to get out of this one and get DVD out!) or player would stutter or give vertically jumpy image with checkered patterns rendering the movie totally unviewable. Had to put it back to zone 1 and give it back to Walt.
	Region code posted by majormulatto, February 03 2015:
	the 9999 hack no longer works on machines with a 9/2014 manufacture date. the same hack used to work on the GPX D200B and several other cheap house brands, but also no longer works on 2014 machines. i don't know if this is just american machines or all machines made last year. anyone know anything?